What is Lock Snapping?
You may well have heard of “cylinder snapping” or “lock snapping“. Lock snapping is a very common method used by burglars to break into a property that has a euro cylinder lock, lock snapping requires ZERO skill by the thief to snap the lock.
Euro lock cylinders prone to lock snapping are found on almost all domestic houses that have UPVC doors, although a significant number of composite & aluminium doors use them too, and they’re often used in commercial as well as domestic environments.
Lock Snapping Prevention
1. The Method of Lock Snapping
The method of lock snapping involves breaking the cylinder to then manipulate the lock to open.
Whilst you may think that all the multi-locking points on your door make it secure, it’s important to realise they are all operated by the cylinder – this is the weakest point and if compromised all the locking points are rendered useless.
How long does lock snapping take?
It can take just 5-10 seconds for a thief to snap the lock.
Requires no specialist tools or knowledge – Various Police Forces are warning residents that lock snapping is a method of attack which requires no specialist tools or knowledge.
25% of burglaries – West Yorkshire Police Force has found that 25% of burglaries use this method of entry.
How common is lock snapping?
Spreading over the UK – Whilst lock snapping previously been restricted mainly to the Yorkshire area we are now seeing Police giving warnings in other parts of the country.
2. How an Anti Snap Lock can prevent a Burglary!
What lock is used to stop lock snapping?
The best upvc lock to fit on a door protecting it from snapping is a euro cylinder lock that is tested and approved to SS312 diamond standard, which makes the lock Anti Snap.
How a lock will protect against lock snapping:
The lock must be tested against lock snapping
– SS312 Diamond approved lock cylinders have been tested to resist this particular type of attack
– Changing your euro profile cylinders will protect your door, providing you with an anti-snap lock on your door.
Fit the lock correctly – a locksmith will also make sure the lock is fitted correctly, not fitting in the correct way will lead it prone to snapping.
There are different sizes of euro locks – Cylinders are available in various sizes, so fitting the correct size is vital.
To get one of these fitted we recommend contacting your local MLA approved locksmith who can advise you on getting one installed to your front and back doors.
Anti Snap Euro Cylinder Lock
What lock standard you should be looking to fit is covered below in the What Standard Cylinder Should I Fit? section further on.
3. What Locks are at Risk to Lock Snapping?
The only type of euro cylinder lock at risk to lock snapping is a euro cylinder that is not tested and approved to either SS312 Diamond or TS007 3*.
We will cover what standard lock you should fit further on in this article.
Types of Euro Cylinder Locks at Risk to Lock Snapping
The following types of euro cylinders are prone to lock snapping:
1. Single Cylinders – only gain access from one side
2. Double Cylinders– gain access from both sides
3. Thumbturn Cylinders – can lock & unlock from the inside without a key
Next, we cover how to tell if you have a euro cylinder fitted to your door.
4. How to tell you have a Euro Cylinder Lock Fitted
If you have a uPVC/composite or wooden door, the chances are you have a euro cylinder lock.
For the pros and cons of this type of lock see our types of door lock page .
5. How do I know if I have anti-snap locks?
The first thing to know is you may see anti-snap locks referred to as snap-proof, snap resistant or snap secure.
Is your euro cylinder lock old? – If the euro lock cylinder on your door was fitted before 2011 it almost certainly has not been tested for lock snapping so is not anti-snap.
Have a new lock cylinder fitted to your door? A new euro lock cylinder could be anti snap, we will discuss this below.
Anti-Snap Locks Introduced in 2011
The test standard for Anti-Snap locks was first introduced in 2011 with the Sold Secure SS312 diamond standard.
2 Ways to Find Out Your Door Lock is Anti-Snap
Essentially there are two ways you can ensure the euro cylinder lock on your doors is anti-snap, the first is:
1. The lock is an SS312 Diamond Approved Cylinder
One way of identifying if a lock is anti-snap is by making sure your lock is an SS312 Diamond Approved Cylinder.
SS312 Diamond is the highest level of approval for a euro cylinder lock.
Find a list of all SS312 diamond approved lock cylinders click here that have achieved this highest level of approval by visiting the Sold Secure website.
The Brisant Ultion is SS312 Diamond Approved
A diamond standard cylinder protects against lock snapping
About SS312 Diamond Standard
SS312 Diamond was launched in 2011 by Sold Secure, other standards have been launched to stop lock snapping but the Sold Secure standard is seen by most as the leader and therefore the approval to have.
2. Lock has the 3 Star Kitemark Logo
If your lock has the 3-Star Kitemark Logo on it, this indicates the lock is tested against lock snapping.
3-Star Kitemark Logo = Anti-Snap lock protection
The Kitemark logo can be found anywhere on the lock; it is usually found on either, the front or side of the euro cylinder.
Find out the Best Lock Cylinder to Stop Lock Snapping – click here
6. What Standard Euro Cylinder Lock Should I Fit?
To protect your door locks from lock snapping there are three ways to go.
OPTION 1 – Sold Secure 312 Diamond Approved Cylinder
Fitting a Sold Secure Diamond approved cylinder ( SS312 ) will help prevent being burgled as this standard of euro cylinder is tested against lock snapping methods used by criminals.
SS312 Diamond Standard Anti Snap Lock Cylinder – Image from Avocet Hardware Ltd
>> West Yorkshire Police recommend using an SS312 Diamond Cylinder
OPTION 2 – TS007 3 Star Kitemark
If an SS312 Diamond cylinder is not used, your euro cylinder lock should at least reach the TS007 3 star Kitemark standard to provide true resistance to snapping.
If it’s not Sold Secure diamond make sure a cylinder at least has a 3-star kitemark
IMPORTANT: Don’t rely on the manufacturer stating its snap resistance; you should always look for 3rd Party approval to confirm a product’s performance.
>> TS007 3-Star is recommended by West Yorkshire Police
OPTION 3 – 1 Star Kitemark Cylinder with 2 Star Door Furniture
1-star lock cylinder + 2-star door furniture
A 1-star kitemark cylinder fitted with a 2-star kite mark door furniture ( door handle, cylinder guard ).
7. How should a Euro Cylinder Lock be fitted?
It is vital the euro cylinder lock on your door is fitted correctly, as lock cylinders vary depending on the door and handle thickness.
Incorrectly Fitting Euro Cylinder Locks – can lead to Lock Snapping.
If the cylinder is sticking out by a large amount ie more than 2mm then its not fitted right.
The more of the cylinder that is accessible, the more prone it is to snap
Again if the cylinder is overhanging by a large distance ie more than 2mm then its fitted wrong, the cylinder should be fitted flush to the handles.
How to fit a Euro Cylinder Lock correctly:
The cylinder should not protrude more than 2mm from the handle
Ideally should be completely flush with no external overhang.
The correct size of the cylinder it vital.
Summary on Lock Snapping
The quickest way to protect yourself against this burglary method on the rise is simple, contact your local approved locksmith to fit a Sold Secure Diamond approved cylinder.
If you want to go that extra mile then why fit some high-security door furniture too, such as 2-star kitemarked security handles.
Here at locksmith training merseyside we do locksnapping as part of the course and give you information about it .