Phone or Email Me in the First Instance to Discuss Your

                 LOCKSMITH TRAINING NEEDS

 

I can alter the course & tailor make a course to suit your

                     NEEDS AND EXPERIENCE

 

We are Cheaper Than the Rest, Only Because We Have

                          FEWER OVERHEADS

 

 The Quality of our Locksmith Training is in Many cases

                      BETTER THAN THE REST

 

  OUR VALUE FOR MONEY CANNOT BE BEATEN.

 

READ OUR FEEDBACK FROM LOCKSMITH TRAINEES

 

       Locksmith Training Merseyside teach N.D.E

                            None Destructive Entry.

 

---

    PLEASE  READ  OUR TERMS & CONDITIONS PAGE

---

Each locksmith training course is carried out on a One to One basis. That way you will have all the locksmith training to yourself. You get my full attention all the time throughout the course. There are not many locksmith training courses who can promise that, as most have 5 or 6 to a class and most of the day is taken up repeating the same thing, not with locksmith training merseyside, I ONLY DO One To One Locksmith Training.

 

Locksmith Training Courses are available anytime to fit around your existing work commitments and are held in a purpose built locksmith training workshop. We have trained maintenance staff both at their place of work in the past and now at our purpose built locksmith training workshop.

Tea & Coffee Breaks taken anytime thoughout the training day.

 

 

---

 

 

Everyone who completes a  3 or 4 Day Training Course with me receives a FULL BASIC LOCKSMITH TOOL KIT WHICH HAS AS PART OF IT A 13 PIECE LOCK PICK SET AND OTHER LOCKSMITH TOOLS, as part of the course. These are designed so that you will be able to continue your locksmith training when you finish your training and when you set up on your own. The kit comprises of a high quality lock pick set,

locksmith tension wrenches,

broken key extractors,

locksmith mica,

key turners, 

bump keys, washers and a bump hammer,

rake keys,

door opening tools, 

3 / 5 lever mortise lockpicks and tension tools,

A lock snapper,

cam turner,

hardplate drill bits,

screwdrivers,

locksmith mica, and more,

The value of these tools would be well over £400. These tools will go a long way to helping you on your first steps on the locksmith ladder. I dont know of any other locksmith training course that you get so much from.

As part of the 3 / 4 day training courses we include a Mortice Lock Id Manual that will become invaluable in opening and identifying mortise locks

 

---

New anti-snap 3 star high security barrels are flooding the market. We will also teach you how to get past these barrels and open the door as well as showing you how to use the new locksmith tools which are just on the market to open these locks.

---

                                                       

                Recently Added To The Course list

How to Open the New 3 star euro locks, Ultion, WXM, Yale Superior, Asec, we open them all.

 

The new ABS tool that opens ABS locks in seconds

                       Added to the course list       

   Contact me about  3 star Lock Pick Training

                  

 

          Garaint Jones Mortice Lock Decoders

       These Mortice Lock Decoders are the Best

   We use & demo these Decoders on the courses.

 

New upvc French/Composite doors to practise on.

 

             

 

   4 DAY, INTENSIVE LOCKSMITH

                                  COURSE

 

A TRAINEES TOOL KIT IS GIVEN WITH THIS COURSE

 

 We teach N.D.E. training/None Destructive Entry

 

MORTICE ID MANUAL IS GIVEN WITH THIS COURSE.

 

 

  DAY ONE, MODULES

 

Health and safety discussion

 

A wide range of the available tension tools , shown and discussed

 

Hand picking of cylinders, night latch and rim cylinder locks on an actual door and not on a board or in your hand like some courses do.

 

Hand picking of euro cylinders on an actual door like you would on an actual job.

 

Fitting and removal of rim cylinders and euro barrels from a door, its not as easy as you think.

 

Removal and Refitting of upvc Gearboxes.

 

Opening Failed Mechanisms on upvc Patio and Standard upvc Doors

Stripping down, rebuilding and repinning of locks.

 

Repinning locks using lock shims, followers, pinning shoes, and pinning kits.

Importance of lock tension and what the various lock picks are used for.

Plug spinning this important locksmith tool explained and practised.

Electric gun picking and manual gun picking, using various lock pick guns and tension tools.

 

Super mica – the correct Use of this important locksmith tool, many locksmith trainers teach the wrong way to do this.and we do it on a really tight fitting door, not like some trainers who have loose fitting doors ?

 

What to do when the snib is down on a rim cylinder, not many trainers show you what to do when this problem occurs on a lockout job.

Various letter box tools , Souber, Outside in, etc – use of and practise with and without camera, and the various add on gadgets / tools.

Thumb turners – correct Use of and lots of practise with the proper tools, theres many that dont work and one that i make myself that does, superbly well.

Lock bumping explained and practised on various locks on an actual door and your own bump keys cut on a key cutting machine.

 

Lock bumpers / rubber washers / springs, explained and used with bump keys.

Question and answer session.

 

 ** Use of the thumbturner tool that will amaze you, as in how easy it is to open locks with it. AS FAR AS I KNOW WE ARE THE ONLY LOCKSMITH TRAINING COURSE THAT GIVES THIS LOCKSMITH TOOL AWAY AS PART OF THE COURSE FOR FREE **

 

A demonstration of OUTSIDE IN LOCKSMITH TOOLS the best purpose made locksmith tools currently available on the market, of which we are an official supplier, these tools will amaze you . 

Have a look at the site below to see outside in locktools pitchblack kit.

www.outsideinlocktools.co.uk/pitchblack_pack.htm

 

 

 

 DAY TWO, MODULES.

 

Euro/oval lock cylinders – mainly found on upvc doors, explained & picked open, using various lockpicks, guns, and tension tools.

Euro/oval cylinders – snapped, drilled, practised and shown how, you,ll be surprised to how many different ways there are to bypass these locks.

 

3 Star High Security Dimple Locks, ie Ultion, Garrison, Pioneer + etc, you get to pick all these and more with dedicated lock picks .

Euro/oval locks measured removal and refitting, lock fitting, mortise, digital and cylinder type locks, various other techniques shown and practised to gain entry to these locks.

 

UPVC mechanisms explained, measured and fitted, common locksmith problems explained.

 

Opening of failed upvc multi point door and window locks

Cam locks, desk, garage doors, filing cabinets etc, taught how to pick and jiggle, open these locks.

 

Methods of opening wafer locks – Jiggling/picking.

 

Bullet / shutter locks non destructive entry.

Padlock shimming / picking / by passing.

 

Combination key safes decoded and opened.

 

Lever padlocks picked opened, using home made and shop bought  lockpicks.

 

Adams Rite screw in cylinder locks, bypassed, both the latch and deadlock versions, not many courses show you how to bypass the deadlock versions of these locks, i make the tools myself, you cant buy the tool to bypass the deadlock version.

 

Key and lock identification for mortise locks and pinned locks using the ICL book and Gary angliss books.

You get as part of this course you get a locksmith mortice lock id manual free of charge

 

BUSINESS ADVICE

 

Insurance Requirements

Lock stock requirements

Best ways to gain new customers, tried and tested methods 

Best methods to advertise

Cataloges from suppliers / introductions to suppliers

 

Question and answer session.

 

 

 DAY THREE, MODULES.

 

A FULL DAY SPENT ON NON CURTAIN LOCKS PICKING / OPENING ETC.

 

Non curtain Mortise locks disassembled and rebuilt.

2 / 3 & 5 lever mortise locks Picked using wires, overlifting, 2 in 1 picks and try out keys, these locks can be tricky to open, as you,ll find out.

Try out keys / curtain picks used, drilled using drill gauges and lock id manuals.

We give out free of charge, a mortise lock id manual with this course.

 

The use of mortise lock gauge keys explained and then practised.

Quickest entry and non-destructive entry methods shown and practised.

Lock recognition explained using various mortise lock id manuals and other methods.

YOUR OWN Mortise lock Gauge keys cut and shown use of on various locks.

Lock fitting – cylinder and mortise locks.

Broken key extraction on locks in an actual door.

Digital locks – fitting/code changing and how to bypass these locks.

Digital locks – bypassing / opening when code is lost.

Padlocks – Discussed picked and bypassed.

 

Own lock picking tools/by passing tools made. Homemade curtain picks, cylinder picks, bypass tools. All made and all will work. Not many courses make tools to open non curtain locks and they are expensive to purchase.

 

 

 Depth and space keys explained and shown the proper way to use them when no key is available and you want to repin a cylinder and cut a matching key.

 

How to cut a key for a lock were original is not available or no key is available.

Lock drilling explained and practised the right and proper way.

Non-Destructive entry explained/practised & advised to try and use all the time.

Repinning locks explained, spool pins, mushroom, serrated, set pins, driver, key pins, springs, dissassemble and rebuilding of nighlatch cylinders, euros and ovals.

UPVC mechanisms explained, fitted, measured & common problems overcome.

 

How to open a failed upvc mechanism in a locked door.

Advice & paperwork given out on start-up, lock stock and tools, both good/bad.

 

Mortise lock decoding / pin and cam kits, explanation and use of these expensive and tricky to use, but useful locksmith tools.

Question and Answer session.

At the end of the training i,ll tell you the best places to get your tools and stock and if we have time i,ll take you and introduce you to them.

 

 

 DAY FOUR, MODULES.

A MORTICE LOCK ID MANUAL IS GIVEN WITH THIS COURSE.

 

A DAY SPENT OPENING BS CURTAIN LOCKS

PICKING / BYPASSING / DRILLING.

 

We show you all the ways to open doors fitted with these british standard BS3621 mortise locks.

 

5 lever BS 3621 mortise locks , disassembled and rebuilt.

 

The various parts on BS 3621curtain mortise locks explained.

 

Picking BS 3621mortise locks using the latest mortise lock picks.

 

Drilling using the mortice drill gauge and other tools supplied on the course.

 

The universal drill point for these locks explained and practised.

 

Bypassing BS 3621 mortise locks with wires, overlifting & picking.

 

Opening BS 3621 mortise locks using pin and cam kits etc.

 

How we cover up drill holes on wooden doors using various techniques.

 

Picking open BS 3621 Mortise Locks on an actual door.

 

Question and Answer session.

 

You will keep all the tools we make in addition to the locksmith tool kit provided. You will also receive a lock ID manual and information including mortise and rim locks, which would cost hundreds if bought separately. This information will greatly help you when on a job. you will also receive euro practise locks.

 

If at any time after your training you have any further questions or problems I am only a phone call or email away. I encourage trainees  to contact me if they have any problems in the future.

 

You will also receive on completion of the training course a signed certificate, stating that you have completed one of our locksmith training courses.

 

I will also put you in contact with locksmith tool companies were you will be able to purchase all your professional locksmith tools.

 

You get specialist one to one locksmith training exculsive to Locksmith Training Merseyside.

 

We give our locksmith bible with every locksmith course, trainees find it extremely beneficial to refer to after they leave us.

 

Our training course price includes a certificate to show you have completed our locksmith course to a satisfactory level, a dedicated 24hr phone number, were im available to help you out if you,re stuck, if i can i will go out and help you, and you get tea / coffee and cold drinks throughout the course.

 

---

 

---

 

You dont need to bring anything with you, everything is provided on each day you are training with us, including tea/coffee breaks.

 

---

                                          

   WE ONLY DO ONE TO ONE TRAINING

                   SO YOU CAN LEARN MORE

 

---

 

Contact Dave on

                  01744 613202 / 07711626914

           For more information

 

                     

---

 

 

 

 

 

 3 DAY, INTRODUCTION TO

LOCKSMITHING COURSE.

 

   TRAINEES TOOL KIT IS GIVEN WITH THIS COURSE

 

 MORTICE LOCK ID MANUAL GIVEN WITH THIS COURSE.

 

 

 DAY ONE, MODULES.

 

Hand lock picking of cylinders, night latch and rim cylinder locks on an actual door and not on a board or in your hand like some courses.

 

Hand picking of euro cylinders on a actual door like you would on a real life job.

 

Fitting and removal of rim cylinders and euro barrels from a door, its not as easy as you think.

Stripping down, rebuilding and repinning of locks for rekeying etc.

 

Repinning locks using lock shims, followers, pinning shoes, and pinning kits.

Importance of lock tension & what the various lock picks/tension tools are for.

Plug spinning this important tool explained and practised.

Electric gun picking and manual gun picking, using various lock pick guns and tension tools.

 

Super mica – the correct Use of this important locksmith tool, many trainers teach the wrong way to do this, and we do this on a tight fitting door, not a loose one like some trainers use.

 

What to do when the snib is down on a rim cylinder, not many trainers show you what to do when you come across this problem on a lock job.

Various letter box tools , Souber, Outside in, etc – use of and practise with and without camera.

Wire Thumb turners – correct Use of and lots of practise with the proper tools, theres many that dont work and one that i make that does, superbly well.

Lock bumping explained and practised on various locks on an actual door and your own bump keys cut.

 

Lock bumpers / rubber washers / springs, expained and used.

Question and answer session.

 

 ** Use of the thumbturner tool that will amaze you, as in how easy it is to open locks with it. AS FAR AS I KNOW WE ARE THE ONLY TRAINING COURSE THAT GIVES THIS TOOL AWAY AS PART OF THE COURSE FOR FREE **

 

A demonstration of OUTSIDE IN LOCKSMITH TOOLS the best purpose made locksmith tools currently available on the market, of which we are an official supplier, these tools will amaze you . We also include a demonstration of the brand new PITCH BLACK KIT WIRELESS CAMERA AND MONITOR, which attaches to the letterbox tool so you can see what your doing in pitch black.

Have a look at the site below to see outside in locktools pitchblack kit

www.outsideinlocktools.co.uk/pitchblack_pack.htm

 

 

 

 DAY TWO, MODULES.

 

Euro/oval lock cylinders – commonly used on upvc doors, explained and picked.

Euro/oval cylinders – snapped, drilled and pulled, practised and shown how, you,ll be surprised to how many different ways there are to bypass these locks.

Euro/oval locks measured removal, refitting & common problems overcome.

 

Lock fitting, mortise, digital and cylinder type locks, various other techniques shown and practised to gain entry to these locks.

Cam locks, desk, garage doors, filing cabinets etc, you are taught how to pick and jiggle open these tricky little locks.

 

Methods of opening above locks – Jiggling / picking.

 

Bullet locks / shutter locks bypassed and picked.

Padlock shimming, picking & bypassing.

 

Combination key safes decoded and opened using home made tools.

 

Lever  padlocks picked open using home made tools.

 

Adams rite locks, we show you how to bypass both the latch and dead lock version, i make these tools myself, you cant buy the tool to bypass the deadlock version.

 

Key identification  for mortise locks and pinned locks explained.

 

Question and answer session.

 

 

 DAY THREE, MODULES.

 MORTICE LOCK ID MANUAL IS GIVEN WITH THIS COURSE

 

3 and 5 lever Mortise locks disassembled and rebuilt.

2 & 3 lever mortise locks Picked using wires, overlifting, 2 in 1 picks and try out keys.

5 lever BS locks picked open and explained.

Try out keys / curtain picks used, drilled using drill gauges and identified using the various lock id manuals on the market-ICL and Gary angliss.You can also use the mortise lock id manual that we give out with this course.

 

The use of gauge keys explained and then practised.

Quickest entry and non-destructive entry methods shown and practised.

 

Lock recognition explained using the various mortise lock id manuals thats available, Gary angliss / ICL ,and the one that i supply free of charge .

YOUR OWN Gauge keys cut and shown use of.

Lock fitting – cylinder and mortise locks.

Broken key extraction on various locks on an actual door.

Digital locks – fitting/code changing.

Digital locks – bypassing/opening when code is lost.

Padlocks – Discussed, picked and bypassed.

 

Own lock picking tools / bypassing tools made. Homemade curtain picks, cylinder picks, bypass tools. All made and all will work. Not many courses make tools to open non curtain locks and they are expensive to purchase.

 

 Depth and space keys explained and shown the proper way to use them, when cutting a key for a lock when no key is available.

 

How to cut a key for a lock were original is not available or no key is available.

Lock drilling explained and practised.

Non-Destructive entry explained and practised.

Repinning locks explained, spool pins, mushroom, serrated, set pins, driver, key pins, springs, dissassemble and rebuilding of nighlatch cylinders, euros and ovals.

UPVC mechanisms, measuring and  fitting,  and how to over come the various problems you might encounter on a job.

 

How to open a failed upvc mechanism, fitting them, common problems discussed & how to overcome them.

Advice and paperwork given out, on start-up, stock and tools.

 

Mortise lock decoding / pin and cam kits, explanation and use of these expensive but useful locksmith tools.

Question and Answer session.

 

At the end of the training i,ll tell you the best places to get your tools and stock and if we have time i,ll take you and introduce you to them.

 

You will keep all the tools we make in addition to the locksmith tool kit provided. You will also receive lock ID  information including mortise and rim locks, which would cost hundreds if bought separately. This information will greatly help you when on a job. You will also receive practice locks – cylinder, euro and mortise.

 

If at any time after your training you have any further questions or problems I am only a phone call or email away. I encourage trainees  to contact me if they have any problems in the future.

 

You will also receive on completion of the training course a signed certificate, stating that you have completed one of our locksmith training courses.

 

I will also put you in contact with locksmith tool companies were you will be able to purchase all your professional locksmith tools.

You get specialist one to one locksmith training exculsive to Locksmith Training Merseyside.

We give our locksmith bible with every locksmith course, trainees find it extremely beneficial to refer to after they leave us.

 

Our training course price includes a certificate to show you have completed our locksmith course to a satisfactory level, a dedicated 24hr phone number, were im available to help you out if you,re stuck, if i can i will go out and help you, and you get tea / coffee and cold drinks throughout the course.

 

 

---

 

For full details of any of our courses

Contact Dave on 01744 613202 for prices and availability.

 

You dont need to bring anything with you, everything is provided and you can take as  many tea / coffee breaks as you like.

 

We Do 1 & 2 Day Courses for Maintaintence Staff

  We Do A Special Deal For Maintenance Companies

                      Contact Me For Further Details

         Phone Dave On 01744 613202 

---

     

 

        Locksmith Training Merseyside

           We Only Do One To One Training

                          So You Can Learn More.

 

Contact Dave on

             01744 613202 / 07711626914

For further information or to book a course.

 

 

             1 & 2 DAY, TAILOR MADE COURSES

                     FOR MAINTENANCE STAFF

                                      

We do a Special Deal for Maintenance Companies

We also do 1 & 2 day tailor made locksmith training courses to suit each trainees needs, please get in touch to discuss your locksmith training needs .

WHY SHOULD YOUR MAINTENANCE TEAM DO A COURSE WITH US

WELL FOR A STARTERS WE HAVE TRAINED A LOT OF THE LARGE MAINTENANCE COMPANYS IN THE NORTHWEST, REGENDA, PLACES FOR PEOPLE, SOVINI HOUSING, EQUITY HOUSING, PLUS DANE HOUSING, RIVERSIDE HOUSING , M & Y MAINTENANCE AND MANY MORE.

WE HAVE BEEN TRAINING HOUSING ASSOCIATIONS AND BUILDING MAINTENANCE COMPANYS FOR ABOUT 4 YEARS NOW, THEY CONTACTED US TO SEE IF WE COULD HELP THEM WITH THEIR METHOD OF ENTRY INTO HOMES, BASICALLY THEY WAS SMASHING DOWN DOORS TO GAIN ENTRY AND IT WAS COSTING THEM THOUSANDS IN DAMAGED FRAMES, DOORS AND LOCKS.

WE SHOWED THEM HOW TO GAIN ENTRY SIMPLY AND EASILY, M&Y BUILDING MAINTENANCE WAS THE FIRST COMPANY WE TRAINED AND THE LADS WE TRAINED AS WITH ALL THE COMPANYS WE TRAIN REALLY TOOK TO THE TRAINING AND HAVE BECOME GOOD LOCKSMITHS.

WE CAN TRAIN YOUR MAINTENANCE OR JOINERY TEAM TO GAIN ACCESS TO UPVC AND WOODEN DOORS IN A MATTER OF MINUTES, SAVING YOU THOUSANDS OF ££££S OVER SMASHING YOUR WAY IN OR HAVING TO CALL OUT A LOCKSMITH TO GAIN ENTRY.

ALSO AS PART OF THE COURSE WE WILL SHOW YOUR EMPLOYEES HOW TO OVER COME THE PROBLEMS THEY,LL FIND ON THE NEW ROCK DOORS AND HIGH SECURITY LOCKS THAT ARE BECOMING MORE AND MORE POPULAR THESE DAYS.

MORE AND MORE HOUSING ASSOCIATIONS AND BUILDING MAINTENANCE COMPANYS ARE TELLING US THAT THEY ARE WANTING THEIR EMPLOYEES TO BECOME TRAINED UP IN THE ART OF LOCKSMITHING, THEY ARE FINDING THEY ARE COMING ACROSS MORE AND MORE HIGH SECURITY , ANTI SNAP LOCKS, MUCH MORE THAN THE OLD STANDARD EURO LOCKS THAT EVERYONE COULD OVER COME EASILY.

OUR TRAINING FOR YOUR COMPANY WILL :

SAVE YOU HUNDREDS IF NOT THOUSANDS ON ONGOING COSTS OF REPLACING LOCKS, DOORS AND REPAIRS TO FRAMES ETC.

IMPROVE THE SKILLS OF YOUR EMPLOYEES.

ENABLE YOUR EMPLOYEES TO OPEN / BYPASS ANTI SNAP EUROS AND HIGH SECURITY LOCKS, WITHOUT CALLING OUT A LOCKSMITH.

OPEN LOCKED DOORS MUCH MORE SAFELY THAN BASHING DOWN DOORS.

IF YOU WANT TO DISCUSS A TRAINING COURSE FOR YOUR EMPLOYEES, THEN PLEASE DONT HESITATE TO GIVE ME "Dave" A RING ON 07711626914 OR 01744 613202, OR YOU CAN EMAIL ME AT dmlocksmithsschool@yahoo.co.uk WHERE I,LL BE HAPPY TO ANSWER YOUR QUESTIONS AND INVITE YOU DOWN TO THE Locksmith Workshop FOR A LOOK ROUND.

REGARDS

Dave Mitchell

locksmith Training Merseyside.

 

You dont need to bring anything with you, everything is provided and you can take as many tea coffee breaks as you like thoughout the day.

 

 

_________________________________________________________

 

Contact Dave on

    01744 613202 / 07711626914 for more information

 

 

                                    Email dmlocksmithsschool@yahoo.co.uk